Latest Products
DAIWA TD BLACK REEL MQ SPIN SALE!!
The eagerly awaited Daiwa TD Black MQ Spin Reel is now on the market, replacing their former LT model. With boatloads of fans queuing before it hit retail shelves and fast-selling out, they're queueing again to get one! The excitement over the Daiwa TD Black MQ Spin Reel is primarily due to the incredible list of top-shelf technological inclusions for a reel that sits firmly at the mid-price point.
$240.00
Daiwa’s biggest evolution in spin reel design, MQ allows for the use of larger gears for enhanced power, precision and longevity, with its single piece construction increasing body strength and rigidity and eliminating unwanted water and grime ingress into the reel.
The TD Black MQ’s list of designs and features doesn’t end there with LT Concept combining with Tough Digigear for optimum reel power and refinement, while ZAION Air Rotor allows for flawless rotational balance and minimal start up inertia.
Monocoque Body: MQ Body takes reel design to the next level. The MQ system does not require a conventional side plate, instead using an engine plate to screw directly to the body. Eliminating the need for screws to hold a body cover in place. MQ body improves the strength of the reel, it also improves the water resistance of the body and allows a larger diameter drive gear to be installed.
Zaion V Body: A new generation of lightweight Daiwa’s resin and carbon material. The Zaion V material is both strong and incredibly lightweight.
Magsealed Body: Ultimate protection is delivered to the engine room of the reel with a magnetised oil seal located on the main shaft of the reel’s rotor shutting the door to the elements and unwanted intruders. Dust, water, and salt intrusion into the inner workings of a reel are a thing of the past with MagSeal.
Corrosion Resistant Ball Bearings (CRBB): Lasting 12 times longer than standard stainless steel bearings Daiwa’s CRBBs feature specially treated stainless steel, and a protective shield on the bearing race that seals out sand, fine grit, salt crystals and other abrasives. The result is a longer-lasting bearing that’s protected from the corrosive elements that destroy traditional bearings.
ATD Drag: Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
Finesse Drag: Designed for low start-up inertia finesse applications, and where minute incremental adjustment and silky smooth consistent drag pressure is required.
Air Rotor: Lighter, stronger and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed out construction reducing weight, while increasing reel sensitivity and rotational balance.
ABS Long Cast Spool: Compared to conventional spools, the LC-ABS has been shown to increase the average flight distance by approx. 5% due to its reduced weight and modified shape.
Machine Cut Forged Tough Digigear: Made from ultra-strong Duralumin that has high tensile strength and exceptional durability, and integrating the analysis and calculation of minute details, such as the impact and tolerances of gear meshing, and the impact of forces during the meshing phase, Machine Cut Forged Tough Digigear results in gear design and performance that is without peer.
Air Bail: Daiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth protrusion-free design and construction line easily slides unencumbered along the Air Bail towards the line roller for trouble free line control.
Features and Specifications:
The TD Black MQ’s list of designs and features doesn’t end there with LT Concept combining with Tough Digigear for optimum reel power and refinement, while ZAION Air Rotor allows for flawless rotational balance and minimal start up inertia.
Monocoque Body: MQ Body takes reel design to the next level. The MQ system does not require a conventional side plate, instead using an engine plate to screw directly to the body. Eliminating the need for screws to hold a body cover in place. MQ body improves the strength of the reel, it also improves the water resistance of the body and allows a larger diameter drive gear to be installed.
Zaion V Body: A new generation of lightweight Daiwa’s resin and carbon material. The Zaion V material is both strong and incredibly lightweight.
Magsealed Body: Ultimate protection is delivered to the engine room of the reel with a magnetised oil seal located on the main shaft of the reel’s rotor shutting the door to the elements and unwanted intruders. Dust, water, and salt intrusion into the inner workings of a reel are a thing of the past with MagSeal.
Corrosion Resistant Ball Bearings (CRBB): Lasting 12 times longer than standard stainless steel bearings Daiwa’s CRBBs feature specially treated stainless steel, and a protective shield on the bearing race that seals out sand, fine grit, salt crystals and other abrasives. The result is a longer-lasting bearing that’s protected from the corrosive elements that destroy traditional bearings.
ATD Drag: Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
Finesse Drag: Designed for low start-up inertia finesse applications, and where minute incremental adjustment and silky smooth consistent drag pressure is required.
Air Rotor: Lighter, stronger and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed out construction reducing weight, while increasing reel sensitivity and rotational balance.
ABS Long Cast Spool: Compared to conventional spools, the LC-ABS has been shown to increase the average flight distance by approx. 5% due to its reduced weight and modified shape.
Machine Cut Forged Tough Digigear: Made from ultra-strong Duralumin that has high tensile strength and exceptional durability, and integrating the analysis and calculation of minute details, such as the impact and tolerances of gear meshing, and the impact of forces during the meshing phase, Machine Cut Forged Tough Digigear results in gear design and performance that is without peer.
Air Bail: Daiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth protrusion-free design and construction line easily slides unencumbered along the Air Bail towards the line roller for trouble free line control.
Features and Specifications:
- Bearing system: 6 1
- MQ Monocoque Frame
- Magsealed zaion body
- Tough Digigear
- Air Rotor and Airspool ABS
- Drag System: Daiwa ATD Drag
- The new MQ Concept body and spool not only looks fantastic but makes it the most robust, most reliable and most advanced spin reel of the Black spin reel lineage. The new strength facilitates the use of much stronger PE line classes.
- Daiwa’s famous Magseal keeps dust, water and other undesirables such as sand from making its way into the critical working parts, increasing the working life of your reel.
- The ATD drag system helps provide a level of assurance that we don’t lose fish on hook-up owing to the reduced start-up inertia, protecting light lines from aggressive strikes.
- Air Rotor helps mitigate the transmission of vibration and delivers a perfectly balanced rotor, especially under load.
- Thanks to larger gears with smaller teeth Tough Digigear is now 50% stronger than the previous and highly successful Digigear II.
- Availability: 50 In Stock
- Model: DAIWA TD BLACK REEL MQ SPIN
-
Brand:
